What is the difference between bicycle chains?

Differences can cause variations in shifting performance between brands and models. Additionally, chains will vary in the quality of steel used. Better chains that are more durable and longer lasting tend to have harder rivets. Riding a bike tends to wear and thin the rivet as it is pulled against the inner plates.

How do I know which chain to buy for my bike?

How do I choose? Bike chain selection is firstly decided based upon the “speed” of the chain; this is because it determines the width of the chain. An 11 speed chain for example is narrower than a 9 speed chain, as the sprockets on the 11 speed cassette have a narrower spacing between them.

What is the difference between 10 and 11 speed chain?

Chains for 11-speed systems are around 5.4mm wide on the outside, vs. around 5.9mm wide for 10-speed ones, so that’s 0.25mm narrower from the center of the cog tooth to the end of the chain pin on each side.

THIS IS IMPORTANT:  Why are Trek bikes so expensive?

What is the difference between 9 and 10 speed chain?

The main difference between a 9 speed chain and a 10 speed chain is that the 10 speed chain is thinner in width, because of the 10 speed cassette, which in turn means the chain is lighter.

Are 6 7 8 speed chains the same?

5, 6, 7 and 8 speed chains

Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. … Going further narrower, like a 10, or 11 speed chain on an 8 speed cassette can and often does work.

How do I know my chain size?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

How much should a bike chain cost?

A bike chain costs anywhere from $10 to $90 depending on the brand, quality, and type of bike you’re buying it for. Basic, cheaper bikes that need a simple chain will be closer to $10. Higher quality chains that are durable and made for top notch road bikes will cost $60 to $90.

Are 11 and 12-speed chains the same?

This is accomplished by making the outer links of the chain thinner. … Ultimately, single-speed chains are the strongest because they can be very thick since there’s only one cog at the back. The width of a 12-speed chain is roughly 5.25mm whereas that of an 11-speed chain is 5.62mm. That’s a 0.37mm difference.

THIS IS IMPORTANT:  Question: Can I ride a bike if I'm 300 pounds?

Can I use a 10 speed chain with an 11 speed derailleur?

the 10 speed and 11 speed derailleurs are interchangeable as far as the shifters go, the difference is that a 10 speed derailleur doesn’t like a cassette cog much bigger than the 36t it was designed for, where the 11 speed derailleurs are designed for 40 and 42t cogs, and seem to be able to handle bigger.

Can I use a 8 speed chain on a 9 speed cassette?

The 9 speed chain is thinner than the 8 speed which suggest the 9 speed cassette has thinner teeth. No, no problems, it works fine. The cogs on 9sp and 8sp are the same thickness, the difference is the thickness of the spacers between them.

Which is better 9 speed or 10 speed?

Depending on what manufacturer you go for, 10 speed is usally only one more speed than a 9 speed, and not even so because your gear ratio don’t change much. Ten speeds are harder to deal with in setting up because they tend to be more finicky.

Will a 10 speed chain work on a 9 speed bike?

In most cases, a 10-speed chain will operate just fine with a 9-speed cassette because it’s slim enough to move up and down the rear cogs without rubbing or skipping.

How many links should a 8 speed chain have?

Generally 6-7-8 speed chains are the same and 9 speed are thinner, more than 9 speed is a bit specialized. The length isn’t as important because you will usually have to shorten the chain to fit your bike. The standard chain is 114 pins (56 links) but you almost never need to know this ( I had to look it up!). Aha.

THIS IS IMPORTANT:  Quick Answer: How can I modify my bike?

What gear should I use on a flat road?

Middle gear is perfect for regular terrain on flat roads. When you need some strength but not too much to ride on undulating terrain, you can shift your gear to the middle level. For that, you have to combine middle chainring on triple rear cogs to ride on flat roads smoothly.