Rear Derailleur: The rear derailleur literally de-rails the chain from one cassette cog to the next. It has a hangy-leg-thingy that has two small cog-shaped wheels mounted in its frame. This hangy thing keeps the chain tight so that all the extra slack is taken up to keep the chain from dragging the ground.
What is the thing that holds the chain on a bike called?
Chainstay: a pair of tubes on a bicycle frame that runs from the bottom bracket to the rear fork ends. Chain tensioner: a device to maintain proper chain tension. Chaintug: a device to aid in setting the proper chain tension. Cluster: a bicycle cogset, either a freewheel, or cassette.
What are the parts on a bike called?
Frame – the main structural part of the bicycle, commonly made of steel, aluminum, titanium, or carbon fiber. Composed of a top tube, head tube, down tube, bottom bracket shell, seat tube, seat stays, and chain stays (see image). A frame and fork sold as a combination are referred to as a frameset.
What does a crankset include?
The crankset, also called the chainset, consists of crank arms, bottom bracket, and chainrings. Cranksets come in three main formats, single, double, and triple. The introduction of huge rear cassettes in recent years has improved the viability of single chain rings.
What is a bike cassette?
The cassette on your bicycle can be found on the rear wheel and is a cluster of sprockets that are a part of the drivetrain. They slide onto the freehub, the ratchet system that controls the drive of your bicycle when you pedal, and can have anything from 5 to 12 ‘speeds’.
The bottom bracket is the bearing system between the cranks. It sits inside the part of the frame called the bottom bracket shell. The bearings are held in the shell by an adaptor or a cup. The spindle connects the two cranks to one another and to the bearings.
What is a chain stay?
The chainstay is a pair of metal tubes on the bike frame that connects the bottom bracket to the rear axle holders. The chainstay connects the bottom bracket to the center of the back wheel.
What does the front fork hold?
The front fork is the two long tubular things that hold the front wheel on the bike. That is but one function of the fork. They also move up and down to soak up bumps in the road surface like a car shock absorber does. The spring allows the fork leg to compress over a bump and then “spring back “.
Can I put any crankset on my bike?
Many chainrings are not compatible across different brands or even across different models for any given brand. Cranksets attach to a frame via bottom bracket, and there are many different types of bottom brackets.
How do I know what crankset I have?
Shimano cranks are all identified with model information above or surrounding the area on the backside of the pedal threads. For example; FC-6700/6750 = Shimano Ultegra. The crank length is often located in the same area, which is helpful to note before placing an order.
How do I know what crankset to buy?
- Measure the length of the Bottom Bracket shell. …
- Count how many chainrings you have. …
- Count the teeth on the chainrings, or look for markings that may indicate the number of teeth (e.g.. …
- Count how many cogs you have at the rear. …
- Length of crank arm is less important for me.