How do I know what bicycle chain to buy?

How do I know what bike chain to buy?

When selecting a chain, the first consideration is the number of rear sprockets. The rear cog sets have been made with 5, 6, 7, 8, 9, 10, 11, or 12 sprockets. As the number of cogs on the rear hub increases, the spacing between cogs tends to be reduced.

How do I know my chain size?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

What size chain does a bicycle use?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

THIS IS IMPORTANT:  What hand do you use for bike signals?

How do I choose a chain?

Quicken the experience with these five simple steps:

  1. Start with a chain style. Stuller’s four best-selling styles — cable, wheat, rope, and box chains — are the most popular styles. …
  2. Choose metal quality. …
  3. Determine chain length. …
  4. Pick a clasp assembly. …
  5. Pair with a pendant.

How much does it cost to replace a chain on a bike?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

What’s the difference between 40 and 41 chain?

#40 will be the beefiest chain in this class. This will help with thicker sprockets since there is more room between the side plates. #41 will look just like the #420 chain, but will stand shorter.

What size is 10B chain?

10B Roller chain made to ISO R606 is 5/8″ or 15.875 mm pitch it is available in single strand 10B-1 duplex 10B-2 and triplex 10B-3. It is possible to have the chain up to 6 strands wide.

How do I tell what grade my chain is?

Just look for the “L” and then the number after it. Each number following the “L” corresponds with a grade of chain. On grade 70 this can also show that the chains are DOT approved! The “L” represents Laclede and our commitment to high quality chain products.

What do the numbers on a bike chain mean?

Chain size is in inches, the three digit number used to describe the chain size is based on the “rule of eights”. The first digit is for chain pitch. This is the distance between the pins. The second and third digits combine for roller width, with a decimal point inserted between the second and third digits.

THIS IS IMPORTANT:  What's the fastest A2 bike?

Do SRAM chains work with Shimano?

Shimano and SRAM 11-speed chains are cross-compatible. If you have a Shimano 11-speed drivetrain, a SRAM chain will work fine and vice versa, however manufacturer’s recommend pairing your components for optimal performance.

What is the standard chain size?

Chain standards

Size Pitch Maximum Roller Diameter
50 0.625 in (15.88 mm) 0.400 in (10.16 mm)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm)

How thick of a chain should I get?

Try to choose chain that fits your size. If you are a slim guy, then slim chains between 2 mm and 4 mm will fit you well. If you have a large size and thick neck, wider chains may look more proportional. We have a selection of men’s sterling silver chains from 1 mm to 8 mm wide.