Are bicycle chains universal?

All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. … However, this does not mean all makes and models of chains are interchangeable. There are two basic types of bicycle chains: “one-speed” chains, and derailleur chains.

Do all bike chains fit all bikes?

Are all bicycle chains the same size? No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.

Do I need a specific bike chain?

The correct type of chain depends on the type of riding your bike is made for, and the number of gears it has. Chains from most manufacturers should fit, as long as the chain is made from good quality material and matches the number of sprockets in your bike’s rear cassette.

Are 6 7 8 speed chains the same?

5, 6, 7 and 8 speed chains

Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. … Going further narrower, like a 10, or 11 speed chain on an 8 speed cassette can and often does work.

THIS IS IMPORTANT:  Is Nishiki a good road bike?

How do I know my bike chain size?

The method of chain sizing depends upon the range of gearing in the system. For bikes with rear sprockets 36 teeth and smaller, the common system is to measure using the largest rear sprocket and largest front ring as a reference. Two rivets are added to this (one-inch) for the place to cut the chain.

How do I know my chain size?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

How do I get a replacement bike chain?

When selecting a chain, the first consideration is the number of rear sprockets. The rear cog sets have been made with 5, 6, 7, 8, 9, 10, 11, or 12 sprockets. As the number of cogs on the rear hub increases, the spacing between cogs tends to be reduced.

How do I choose a bike chain?

How do I choose? Bike chain selection is firstly decided based upon the “speed” of the chain; this is because it determines the width of the chain. An 11 speed chain for example is narrower than a 9 speed chain, as the sprockets on the 11 speed cassette have a narrower spacing between them.

Are Shimano and Campagnolo chains compatible?

Read this article, all 11 speed cassette works with all Shimano, SRAM and Campagnolo drivetrain, meaning chain and RD and crankset, so the answer is the Shimano 11 speed chain and Campagnolo 11 speed chain are interchangable.

THIS IS IMPORTANT:  How much should you pay for a bike?

Are 11 and 12-speed chains the same?

This is accomplished by making the outer links of the chain thinner. … Ultimately, single-speed chains are the strongest because they can be very thick since there’s only one cog at the back. The width of a 12-speed chain is roughly 5.25mm whereas that of an 11-speed chain is 5.62mm. That’s a 0.37mm difference.

Are SRAM and Shimano chains interchangeable?

Shimano and SRAM 11-speed chains are cross-compatible. If you have a Shimano 11-speed drivetrain, a SRAM chain will work fine and vice versa, however manufacturer’s recommend pairing your components for optimal performance.

How do I know if I need a new bike chain?

Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.